Harde Drive Enclosure

  • 1 Bay HDD Enclosure(11)
  • 2 Bay HDD Enclosure(4)
  • 4 Bay HDD Enclosure(10)
  • 8 Bay HDD Enclosure(3)
  • Backplane Cage(3)
  • Hard Drive Dock(7)
  • HDD Enclosure Accessory(9)
  • Home Office Electronics

  • Bluetooth Speaker(1)
  • HomeWorx

  • Antenna(10)
  • Digital Converter Box(9)
  • Lisscode

  • Facial Massager(1)
  • Serum(1)
  • Mediasonic I/O Card

  • External PCI Express Card(6)
  • Mediasonic Mobile Accessory

  • Bluetooth Receiver(2)
  • Cable(5)
  • Camera / DVR(3)
  • Car Accessory(1)
  • Mounting Device(1)
  • ProBox Power Bank(8)
  • USB Hub / Charger(7)
  • Mediasonic Notebook Dock

  • Rapid Dock(2)
  • SmartDock(2)
  • SmartDock Pro(1)
  • OCHO Mobile Accessory

  • Car Accessory(1)
  • Power Bank(1)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
    • Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)

    Mediasonic Raid USB 3.1 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)

    • Hardware embedded raid controller built-in on board with one-button control
    • Built-In USB Hub provides easy access to additional USB Type A and USB Type C connection for expansion
    • Transfer rate up to 10Gbps via USB 3.1 Gen 2.  USB-C to USB-C with E-Mark IC cable included. (3.3ft)
    • Support 3.5" SATA I / II / III hard disk drive up to 12TB per drive
    • Support 2.5" SATA I / II / III SSD / HDD up to 10TB per drive
    • Support SATA 3 6.0Gbps hard drive transfer rate
    • Support UASP and, S.M.A.R.T
    • Smart Fan Function with built-in temperature sensor. 3 level of fan speed selection
    • Power On / Off in synchronization with computer (Does not support auto Power-On due to power failure)
    • New front door design to allow air flow into the enclosure and keep the hard drive cool.
    • USB Hub Feature:
      • USB Type A female connection: USB 3.1 Gen 1 5Gbps with 5V / 1A power output can support USB flash drive, USB card reader, single bay external hard drive, charge smartphones, keyboard / mouse receivers, Bluetooth adapters USB Fan, and USB LED light, etc
      • USB Type C female connection: USB 3.1 Gen 2 10Gbps with 5V / 3A power output can support USB flash drive, USB card reader, single bay external hard drive, and charge smartphones, etc
    • RAID Mode Features:
      • Single Mode: Computer will show up as four independent drives
      • JBOD Mode: Raid 0 Spanning mode
      • Raid 0 (Stripping Mode)
      • Raid 1 (Mirroring Mode
      • Please check user manual for all possbile configuration
      • Note: Mediasonic strongly recommend user to install same capacity / model / brand of hard drive if you are using Raid feature.  Initial raid setup will erase all the hard drive conent.  Please back up your hard drive before the set-up
    • Product Model:  HFR7-SU31CH
    • Product UPC Code: 629329002030
    • 2 Year Warranty from Mediasonic Store

    Mediasonic Product Forum Discussion

    Manual: User Manual Download

    Mediasonic Facebook Page

    • Interface
      • USB Type C
      • USB 3.1 Gen 2 10Gbps
    • Supporting Operating System
      • Windows 7 / 8 / 10 (with MBR enabled, support capacity up to 2TB per drive), (with GPT enabled, support capacity more than 2TB per drive)
      • Mac OSX 10.12 or later
      • Plug and Play / No driver required
    • Power Adapter Specification
      • Safety certification: UL / CB / PSE / CE / FCC / BSMI
      • Input Voltage: 100 ~ 240 VAC
      • Output: 12 V / 5A
      • Output Watt: 60W
      • AC Input Connector IEC 320 C14
    • Product Dimension: 125 (W) x 225 (D) x 165 (H) mm
    • Case Material:  Metal Body
    • Weight: 1.6KG
    • Product Origin:  Made in Taiwan
    • HFR7-SU31CH x 1
    • USB 3.1 Type C to Type C Cable with E-Mark IC (1M / 3.3ft) x 1
    • User Manual x 1
    • Power Adapter x 1 and Power Cord x 1
    • Hard Drive Handle x 4 and Hard Drive Screws x 8
    • Screw Driver x 1
    • 2 Year Warranty from Mediasonic Store
    • Technical Support Email: support@mediasonicusa.com
    • Mediasonic Forum: http://forum.mediasonic.ca
    Documentation Download